Edge Documentation

Perform the following steps when the {{{2}}} server is upgraded to a newer version of {{{2}}}:

1. Check the AppBoard/enPortal PIM online documentation to see if the new {{{2}}} version is supported by the existing {{{1}}} PIM.
2. Test if the new {{{2}}} version is supported by the existing PIM that you have installed, perform the following steps:

{{#ifeq: "5.3" | "{{{3}}}" |

1. 1. Click on the Applications tab

|

1. 1. Under the Web Integrations tab, select Applications & Licenses

}}

1. 1. Right-click on the row for the old {{{2}}} server and select "Modify"
   2. Update the protocol, host, and port to reference the server where the new version of {{{2}}} is running
2. If the new {{{2}}} version is not supported by the existing PIM that you have installed, perform the following steps to upgrade the PIM:
   1. Download the new PIM version from the PIM download site
   2. Follow the steps in the Installation section above to install and configure the new PIM version
   3. Re-create all {{{2}}} channels to reference the new PIM
   4. [Optional] Perform the steps outlined in the Uninstall section below to remove the old PIM from the system