Appboard/2.4/admin/accessing appboard: Difference between revisions

imported>Jason.nicholls
imported>Jason.nicholls
Line 120: Line 120:
=== Session Variables ===
=== Session Variables ===


Additional session variables can be passed in via URL parameter to AppBoard and utilized using SHIM expressions. Only defined variables that are '''not''' marked ''Server Use Only'' will be passed through. Refer to the [[Access_Control_Variables|Access Control Variables]] documentation for more information on creating and using these.
Additional session variables can be passed in via URL parameter to AppBoard and utilized using SHIM expressions. Only defined variables that are '''not''' marked ''Server Use Only'' will be passed through. Refer to the [[appboard/2.4/builder/system_administration/session_variables|Session Variables]] documentation for more information on creating and using these.


* '''_es_.''VariableName''''': the special identifier <tt>_es_.</tt> must be prefixed to the variable name. Set this to the desired value.
* '''_es_.''VariableName''''': the special identifier <tt>_es_.</tt> must be prefixed to the variable name. Set this to the desired value.

Revision as of 12:20, 3 October 2013


Default Access

After a clean install of AppBoard using the default configuration the following details will bring up the login screen, and after logging in, will then bring up the AppBoard Builder. Please note all login page fields are case sensitive.

URL http://<hostname>:8080/
User Name administrator
Password administrator
Domain System


AppBoard 2.4 default login screen


Important URLs

The table below summarizes the important URLs for accessing AppBoard.

Component URL Description
Base URL / Redirects to the dispatcher
AppBoard /enportal/ab/home If the User's default role is portalAdministration, this will launch the AppBoard Builder. Otherwise, this will launch the AppBoard Viewer.
enPortal /enportal/home Launches enPortal
AppBoard Viewer /enportal/ab/home?viewer Explicitly launch the Viewer, useful for administrators.
AppBoard Builder Safemode /enportal/ab/#safeMode=1 Launches the AppBoard builder in safe mode by disabling all stacks. The administrator can then access the configuration panels to delete or edit the broken component.
Dispatcher /enportal/servlet/pd Displays the login page and/or accepts a number of parameters to allow for login credentials to be passed in and redirection (e.g. login, then redirect to a specific stack, or custom html page, etc...). See the section below for more information on the dispatcher. After logging in the user is redirected to the default home address (see below) unless a redirect is explicitly given.

Dispatcher

The dispatcher provides a way to bypass the login screen and pass login credentials via URL parameters. It can also be used to redirect to a different URL once logged in.

Default Home

The default home is used to determine what URL to send a User to when a full path is not provided in the URL, or in cases such as when a User switches to a different Role. By default AppBoard is configured to have itself as the home URL, but in some cases where enPortal is the main interface for end-users then enPortal can be configured as the home URL.

To override the default configuration, and have enPortal as the default home:

  1. edit the [INSTALL_HOME]/server/webapps/enportal/WEB-INF/config/appboard.properties file.
  2. find the following line: dispatch.loginredirect=/enportal/ab/home
  3. and change it to use the URL: /enportal/home
Template-tip.png
The default home URL is a global setting that is not configurable by user, role, or domain - however if it's necessary to have a user login directly to enPortal or AppBoard then they can bookmark the AppBoard or enPortal URLs as shown in the table above.

Login Credentials

The following URL parameters can be used to bypass authentication:

  • login: included but not set to any value
  • userid: set to the User Name
  • password: set to the users password
  • domainSelect: set to the Domain

Examples:

  1. Authenticate and let the dispatcher redirect to the default home page:
    /enportal/servlet/pd?login&userid=USERNAME&passsword=PASSWORD&domainSelect=DOMAIN
  2. Authenticate and go to the enPortal home by implied URL vs dispatcher URL:
    /enportal/home?login&userid=USERNAME&passsword=PASSWORD&domainSelect=DOMAIN

Redirect

To redirect to a specific URL after authenticating use the redirect URL parameter.

Examples:

  1. Prompt user to authenticate and then redirect to /foo:
    /enportal/servlet/pd?redirect=/foo
  2. Combine authentication credentials with redirect:
    /enportal/servlet/pd?login&userid=USERNAME&passsword=PASSWORD&domainSelect=DOMAIN&redirect=/foo

Stacks

By default the stack order and set of stacks is controlled by provisioning stacks to roles. However, it's also possible further restrict the list of visible stacks and select a specific stack by using the following URL parameters. Please note this does not grant permissions, the user/role must already have permission to view the stacks.

A typical use case here is to combine passing in authentication credentials with a specific stack selected for use on an unattended wall display.

Builder diagnostics tool showing Stack IDs
  • selectedStackId: ID of the selected (visible) stack, if used on it's own the user will also see all other stacks currently provisioned to their role.
  • onlyStackIds: comma separated list of stack IDs. Only these stacks will appear to the user regardless what is configured for the role and assuming they have permission to view them.

Determining the stack ID can be done from the Builder interface using the Diagnostics too available in the header next to the help menu. Select the Data button and navigate to appboard.config.Stack. Expand out each item to see the stack title and record the IDs for the stack(s) you're interested in.

Examples (these will work with the AppBoard 2.4 Welcome archive):

  1. display a specified stack:
    /enportal/ab/home?selectedStackId=07BCE32E-D977-EACF-EAFB-33E579C5F63A
  2. display only the specified stack:
    /enportal/ab/home?onlyStackIds=07BCE32E-D977-EACF-EAFB-33E579C5F63A
  3. display a specified stack and restricted set of available stacks:
    /enportal/ab/home?onlyStackIds=07BCE32E-D977-EACF-EAFB-33E579C5F63A,4E72001C-2F0D-248C-61EE-33E3679D7400&selectedStackId=4E72001C-2F0D-248C-61EE-33E3679D7400

Also see the Kiosk Mode page for a custom solution using this feature for unattended displays to cycle through a set of stacks automatically.

Session Variables

Additional session variables can be passed in via URL parameter to AppBoard and utilized using SHIM expressions. Only defined variables that are not marked Server Use Only will be passed through. Refer to the Session Variables documentation for more information on creating and using these.

  • _es_.VariableName: the special identifier _es_. must be prefixed to the variable name. Set this to the desired value.

Examples:

  1. Set the variable TESTVAR to myValue, accessed via ${shim:session.var.get('TESTVAR')}:
    /enportal/servlet/pd?_es_.TESTVAR=myValue